Need Support? Let’s guide you to the right answer or agent.

OpenFlows Ideas Portal

ADD A NEW IDEA

StormCAD

Showing 9

Add Capability to Input Custom Grate Area and Perimeter and Report Output Grate Area and Perimeter

Even though grate input parameters such as grate length, grate width, and clogging factor already exist, the resulting grate area and perimeter used in both weir and orifice calculations are not reported as calculation outputs. The end user cannot...
12 days ago in Storm and Sewer Products / StormCAD 0 Needs review

Spread Analysis of a Non-Inlet Location

Establish a means to complete a spread analysis at points of interest which are not inlets. Example 1: Determination of spread width at the end of a barrier/curb where there is no inlet. Example 2: Determination of spread width at a change in shou...
12 days ago in Storm and Sewer Products / StormCAD 0 Needs review

Print Multiple Engineering Profiles at one time

I am working on multiple Storm Drain projects, and it is very tedious to click each profile and print preview, then print to pdf. I'd like to have an option to print multiple profiles at once.
2 months ago in Storm and Sewer Products / StormCAD 0 Needs review

Add a flex table and/or create a summary report (PDF) containing the kinematic flow variables for TR-55 or HEC-22 methods.

The required variables are user entered. None currently are retrieved from the model. Most variables are user defined. Slope and segment values could be populated from the model. We need a table or report for checking the calcs and for legal archi...
2 months ago in Storm and Sewer Products / StormCAD 0 Needs review

NRCS/SCS Peak Discharge

Currently I use ORD and have to use Civilstorm license to run SCS hydrology. I don't really need the full hydrograph for all projects. It would be to have get peak discharge using the stormCAD license inside ORD.
3 months ago in Storm and Sewer Products / StormCAD 0 Needs review

Hydraulic toolbox

incorporate the FHWA hydraulic toolbox into the product for quick calcs, channel lining, culvert outlet protection, etc... Could be an add on that can pull the data out of the model.
about 2 months ago in Storm and Sewer Products / StormCAD 0 Needs review

StormCAD dynamic links to Civil 3D

For StormCAD it would be very helpful to also have a dynamic link between Civil 3D stormwater pipes and StormCAD pipes. We have to run two models essentially and there is a lot of translating data from one model into the other and time spend makin...
over 1 year ago in Storm and Sewer Products / StormCAD 0 Needs review

add Grate Width in utility Property

add Grate Width in Utility Property. (See Attachment)
almost 2 years ago in Storm and Sewer Products / StormCAD 0 Future consideration

Complex Spread Section

Need the function same as Geopak where the user be able to input/use multiple shoulder and road section. (See attachment)
almost 2 years ago in Storm and Sewer Products / StormCAD 0 Future consideration